UAD Level switch Types: LSB / LSA / LSG

Level switch according to your measurements with individual measurements. Level switch produced in Germany. Replacement for asian style Level Switches.

 

UAD Level switch LSB: float: VA52, Ø = 52 mm.. max. pressure: 10 bar. max. temperature: -20°C to +80°C. min. fluid specific gravity: 0,70 g/cm³. mounting: bracket. protection type: IP 68. electrical connection: cable for shipbuilding or navy. contact mode: 1 – NO. 2 – NC. 3 – WE. contact rating: 1 – 250 V AC/ 3,0 A/ 100 VA. 2 – 250 V AC/ 3,0 A/ 100 VA. 3 – 250 V AC/ 1,0 A/ 60 VA. weight: ca. 735 g.

 

UAD Level switch LSA. Housing: gun metal RG5 oder RG10. Float unit: 1.4571. Flat seal: Oil and sea water proofed Novapress. Rubber seal: EPDM, NBR70. Protection type: IP68 cable gland.

 

Approvals: Germanischer Lloyd. Lloyd’s Register. Russian Register. ABS. ATEX – IBExU. Max. pressure: 42 bar (fl oater). Max. density: 0,46 g/cm³. Max. temperature: -40°C…+125°C. Ambient temperature: -40°C…+60°C (Exd-version).

Mounting position: Top or side.

 

The core is the uniform and robust housing with integrated mounting flange of a Cast ', without seals or welds. The housing cover is sealed by means of O-ring. The IP68 is achieved through a factory mounted and verschrumpftem

cable or made by the customer himself. All modules have a high resistance to vibration and impact resistance. This float switch is available in various sizes and types. Therefore, please refer to advance through our contact form to contact us. We are happy to help you configure your float switch. The float switch Type LSB is a switch which operates on the principle of magnetic switching triggering a reed contact. In the float switch a mechanical testing device is mounted. The use of this float switch is extremely diverse in the field of shipping and industry. This robust and reliable float switch is used wherever fluid levels should be monitored or regulated. The use can take place in open containers, or in pressure vessels. Special shapes for fitting in special chambers as a container-by-pass are possible.

 

The float switches have a protective casing which turbulence and movement of the medium damps, and foreign body keeps, thereby ensuring the operability. By means of an electrical output, which is achieved by a very stable reed contact, be optical or acoustic signal shown. These signals can then be used for further processing in the corresponding production monitoring process. The float switch type LSG has been specially developed for the repair sector. While the main body corresponding to the LSA of the process connection is made (flange) flexibly according to customer specifications. An exchange between different (Asian) float switch is not a problem for the LSG. Round flanges with different diameters and hole circles are made of high quality materials and are delivered in the usual quality.