Digital pressure gauge type D2 Calibration manometer -1 to 3 bar

Digital pressure gauge type D2.

Digital pressure gauges are particularly suitable for both stationary and mobile measurement and display of pressures. The use as a pressure reference makes it easy to check, adjust and calibrate other on-site pressure gauges.  

 

Description: Tare / Zero function The programming of any zero points by pressing a button enables a simple offset adjustment, a complex, mechanical adjustment is eliminated. The one-point adjustment enables a linear characteristic shift over the entire measuring range in the positive as well as the negative direction.

 

Display: The large, illuminated, digital on-site display provides information about the measured pressure and signals the current state of the digital manometer even under difficult lighting conditions. The complicated reading of a line scale, taking into account the parallax is not necessary. The shaking of a pointer caused by vibrations or restless pressures is eliminated. display losses or averaging can be set directly via the display filter. A simple and fatigue-free reading is thus ensured.

 

Switchable pressure units: Another highlight is the large number of switchable printing units. Up to 6 different unit characters are possible, which can not afford a complicated double or multiple scale. The desired display dimension is selected directly on the digital pressure gauge and appears clearly on the display. Conversions are not required, the measurement results only have to be read.

 

Min-Max displays and peak function: Experience shows that at some measuring points overpressures and pressure peaks occur which are much higher than the normal operating pressure. Min-Max displays and the fast measuring cycles of the peak function Digital gauges help with system analysis and allow peak detection. This detects faulty displays and the crossing of range limits and prevents damage to the printing systems. Preventive service is often cheaper than repairing or replacing defective measuring equipment.

 

Protection class: High IP protection classes (IP67 (front) / IP67) are available so that little attention is paid to dust and water sensitivity. The robust and impact-resistant digital pressure gauges are equipped with a rubber cap, which protects in field use and transport.

 

Battery operation / auto-off: Power is supplied by long-life batteries or rechargeable batteries. Similarly, the use of an external power adapter is possible. The programmable auto-off function completely switches off the instruments after a long period of non-use, thus increasing the operational readiness. The electronics are designed to be very energy efficient, allowing a battery life of 1500 hours.

 

Technical details: SIKA pressure reference D2. Type: EME8REF-D2-0003. -1 ... 40 bar. Pressure medium: air, gases, liquids. Pressure measuring range: -1 .... 40 bar. Display: multifunction LCD display, 50 x 35 mm.. Function key: ON / OFF, MIN / MAX / FS, MENU / ZERO, RESET / OK. Pressure connection: G 1/4 male thread. Power supply: 2 x 1.5 V AA battery. Resolution: 0.01 bar. Property: 0.1% b.E. +/- 1 digit. with rubber protective cap and test certificate.