Plate spring gauge SIKA MPE

Type: MPE313758000
DIN EN 837-3, type MPE, class 1,6,
Bayonet ring housing stainless steel 1.4301,
Case diameter 100mm,
With safety glass pane,
Hand movement stainless steel,
Display range: -100 to 300 mbar,
Bottom connection, G 1 / 2B, stainless steel

Options:
• Enlarged channel bore Ø 10 mm
• Food or sterile connections, eg. B. tapered neck and groove nut according to DIN 11851, DN 25 to DN 50
• Adjustment hand with aluminum gear
• Protective film and gasket PTFE (from 40 mbar, vacuum-resistant), protective film fine silver / gasket FPM (from 160 mbar, vacuum-proof), protective film tantalum / PTFE gasket (from 160 mbar, on request vacuum-proof), others on request
• 10-fold overpressure-proof by pouring out the upper measuring flange (dial imprint "10-fold üs"), but max. 40 bar with measuring flange Ø 100 mm and max. 2.5 bar with measuring flange Ø 160 mm
• Other housing filling, eg. Eg silicone oil for use down to -40 ° C (flange gasket PTFE)
• Version for temperatures> 100°

Plate spring gauges are used to measure gases and liquids. Plate spring manometers cover measuring ranges from 10 mbar up to 40 bar. The measuring element consists of a clamped between two flanges, circular diaphragm spring. The pressure acting on the plate spring or negative pressure causes a deformation of the measuring element. The size of the deformation is the measure of the pressure to be measured and is transferred to the pointer movement.