Plate spring gauge SIKA MPE 313

Type: MPE31304500G K

Industrial design MPE, class 1.6, EN 837-3

Bayonet ring housing stainless steel 1.4301

Nominal size: 100 mm

Glycerin filling

Display range: 0 ... 250 kPa

Bottom connection

G 1/2, stainless steel

 

Plate spring gauge with horizontal plate spring offer the possibility even for difficult media, such as aggressive, contaminated or viscous liquids, one to find suitable design. The high-quality chemical bayonet ring housing made of stainless steel is ideal for In case of need for housing sealing (outdoor installations, Wet operations) and / or chemical resistance arrives. Pressure gauge according to EN 837-3 • Stainless steel housing in bayonet ring design • Connection thread made of stainless steel, G½ B • Bottom connection, with PTFE lining with enlarged channel opening, optionally open flange • Accuracy according to EN 837-3, class 1.6 (with protective foil class 2.5):

Additional options: Enlarged channel bore Ø 10 mm • Food or sterile connections, eg. B. tapered neck and groove nut according to DIN 11851, DN 25 to DN 50 • Adjustment hand with aluminum gear • Protective film and gasket PTFE (from 40 mbar, vacuum-resistant), protective film fine silver / gasket FPM (from 160 mbar, vacuum-proof), protective film tantalum / PTFE gasket (from 160 mbar, on request vacuum-proof), others on request • 10-fold overpressure-proof by pouring out the upper measuring flange (dial imprint "10-fold üs"), but max. 40 bar with measuring flange Ø 100 mm and max. 2.5 bar with measuring flange Ø 160 mm • Other housing filling, eg. Eg silicone oil for use down to -40 ° C (flange gasket PTFE) • Version for temperatures> 100 ° C.