Module sensor for temperature SIKA MSTSD

Type: MSTSD352063B0200
Temperature: Medium temperature: -50 ... + 250 ° C
Working temperature: -20 ... + 80 ° C.
Installation length L1 = 200mm
Protection tube Ø = 6mm
Output: 4 ... 20 mA HART; 2-wire
Limit contact: 2xPNP; 30V; 200 mA
Supply: HART current loop 12..40 VDC
Electrical connection: M12; 5-pin
Display: 4 digits; 7 segments
Display accuracy: ± 0.2 v. E. ± 1 digit
Process connection: G 1/2
Material: Stainless steel 1.4571 (in contact with medium)
Sensor element: 1x PT100 / class B.
Housing: PBT GF30. with test report to EN 10204-2.2.

 

The measurement of temperature, pressure, humidity, flow or level is a central component of many industrial Applications for process monitoring and control. High demands on the quality of produced products, eg. B. in the pharmaceutical, food or automotive industries the requirement profile of the sensors used. Under They must always be used in a wide range of conditions reliable, precise, robust but also intelligent to be around to deliver reliable results.

 

Thus, with a modular system, cost-optimized limit switches, Transmitter with HART signal, wireless transmitter or fully equipped sensors with display and HART signal are built. In addition, you can all sensors optionally with the industry standard, electrical connection plugs are supplied. So equipped our module sensors are the optimal Solution for your metrological task.