Digital pressure gauge type E2 Calibration manometer 0 to 700 bar

SIKA 
Type: EME8REFE20700
0 ... 700 bar
Pressure medium: air, gases, liquids
Pressure measuring range: 0 ...700 bar
Display: multifunction LCD display, 50 x 35 mm
Function key: ON / OFF, MIN / MAX / FS, MENU / ZERO, RESET / OK
Pressure connection: G 1/4 male thread
Power supply: 2x1.5 V AA battery
Resolution: 0.1 bar
Accuracy: 0.5% b.E. +/- 1 digit
With rubber protective cap and test certificate

The pressure gauge references E2 / D2 / C2 are digital pressure gauges with actual value and MIN/MAX indication. you serve for stationary or mobile measurement of pressures. They have a sturdy housing made of zinc casting with rubber protection cap. Located inside
the electronics unit, the 4½-digit LCD display, the control panel and the replaceable batteries. The manometer references have an accuracy of ± 0.5% Type E2, ± 0.1% Type D2 or ± 0.05% Type C2, respectively related to the respective pressure range end value (FS). The use as a pressure reference makes it easy to check, adjust and calibrate other pressure gauges.

The digital gauge E2 / D2 / C2 has an LCD display with additional elements and graphic bar graph display. The measured values ​​are displayed as numbers in the 4½- digit display. The set measuring unit (bar, PSI, mbar, kPa, MPa, kg / cm2, mH2O, inchH2O) is displayed next to the measured value.
The bar graph display represents the pressure range from 0 to 100% in graphic blocks. The slave pointer function indicates pressure peaks by a single stroke. In the status bar the battery symbol indicates the current battery status. Depending on the default setting, the MIN, MAX or FS value is displayed.
Operation in measuring mode and in the menu for device settings is made via the four buttons on the control panel.