Digital thermometer DiTemp SIKA DT3-20

Type: 98065P54
With rear edge to wall mounting bolt circle 95 mm
After drawing no .: ED-0604
Bayonet ring housing stainless steel 1.4301
Housing diameter d1 = 80 mm
Measuring range: 0 ... + 650 ° C
Dual Display: Analog: Bargraph 17 segments
- Digital: 3.5-digit 7-segment display, 14mm high
Power supply: lithium battery
Input signal: 1 x PT1000 / IEC 751
Sensor connection: Plug M12x1
PIN assignment: 1 + 2

Description: The measuring principle Digital thermometers of the SolarTemp series work with a discrete-time process with one measurement cycle taking 3 seconds. The user can therefore read off the current temperature even in passing. The display unit; The SolarTemp has an easily readable LCD display

Mechanical construction: Instruments of the DiTemp series have a robust mechanical assembly and are designed for both industrial applications and use in harsh environmental conditions. The IP65 protection level (frontside) ensures these requirements are met. The immunity to electromagnetic interference satisfies the requirements of the current industrial standards.

Continuous self-test 
After switch-on, the instrument performs an internal selftest that includes a check of the connected sensor. Automatic diagnostic routines continuously monitor the sensor signal and a broken sensor is indicated via the display unit. The microprocessor constantly tests the sensor signal for plausibility. In the event of a fault, the results are indicated on the display as an error code. 

Integrated measurement transducer
The local display unit means the space requirement is substantially reduced along with acquisition and installation costs, since a complete measuring point is saved. The measurement transducer system is independent of the local display unit, providing you with a redundant measuring system. The instrument is supplied via the transmitter, so there is no load on the battery or solar cell unless the current loop fails. This means the local display is both reliable and independent.